Nitpicking: Because Design is In the Details

Somewhere in my computer, there is a much better picture of this island backsplash in which you can see that this backsplash on the left was cut about 1/8" shorter than the adjacent backsplash on the right.  Those who know me will understand that, once I discovered this, I was driven to distraction by it.  It looked like a dark line between the backsplash and the raised bar countertop, and it stared me in the face and mocked me while I made my morning lattes.  If I could find the picture I was looking for, perhaps you would understand why this was so unacceptable to me.  Perhaps not -- but sweating the details is what I do for a living, and I spent too much money on the new countertops to be disappointed every time I look at that seam.

Bernie remembers that, during installation of the countertops, an adjustment was made to lower the island countertop slightly for the sink installation, and he thinks they may have already cut the left backsplash when the counter was sitting higher because the backsplash on the right was cut second and it fits perfectly.  In the end, however, too short is too short.  Tile Collection sent a repair technician out to change the caulk from translucent to white in hopes that the gap would be less noticeable, but no dice.  I asked for that backsplash to be replaced with a new one cut from the leftover pieces of my granite slab, and Tile Collection obliged.

The tricky thing about this is that initially, backsplashes are cut from adjacent parts of the stone so that the movement or pattern in the stone flows as uninterrupted as possible from one piece to the next.  Since the countertops adjacent to the backsplash were already installed in my home, the fabricator wouldn't have them in his shop as a reference when cutting the new piece.

My solution: Crayons to the Rescue!

I have a roll of heavy white butcher's paper in my sewing room that I use for making patterns, and I used it to make templates of my countertops indicating where the major veining patterns were located.  While I was doing this, my husband was looking at me like I was a wild-eyed crazy woman. 

I took pictures too, naturally, and those were invaluable for showing which colors I needed to have in various places.  I took my pictures to the granite fabrication shop along with my paper patterns, which I laid out right on the leftover piece of granite and found a place where the veining lined up even better than on the original backsplash.

Isn't that fabulous?  SO much prettier than before.  Scroll up and look at the original backsplash again.  I wasn't wild about the Big Black Blob on the original piece, and this one matches perfectly with all the beautiful golds and greens in exactly the right places.  I should tell you that in order to get this perfect piece of backsplash, they had to cut my little strip of stone right in the center of the remnant at about a 45 degree angle, which pretty much ruined a large remnant that they could have sold to another customer for a sink vanity or table top -- and to their credit, no one batted an eye.  I love these guys!  Everyone has great customer service before you sign the deal and stroke the check.  It's really important to me to know that my workrooms and suppliers are willing to go the extra mile for me at the end of the job, making adjustments and corrections until everyone is satisfied with the installation.  I highly recommend Tile Collection to anyone in the Charlotte, North Carolina area for stone countertops or tile work.

The same day that the backsplash was replaced, they also installed my red laundry room sink with its little granite counter.  Bernie and the installers were joking around that my sink is so big, all I'm left with is a granite sink frame instead of a countertop.  Whatever.

This little countertop was also cut from the remnants of the CD Volcano slab we chose for our kitchen.  After I butchered one of the two remnants for my Backsplash of Dreams, this was the only piece left that was big enough for the laundry counter and splashes.  It would have been nice if there was a smattering of the red and green in this piece, but the red ties in with the leftover kitchen fabric that will eventually be used for a little valance on the window in this toom to tie everything together and cheer up my laundry room.  The red enameled cast iron sink was special-ordered from Kohler, and it's the exact shade of red in my fabric (Monado in Havana colorway from Vervain).

The faucet is going to be the Venetian Bronze Delta faucet that I bought for my kitchen about a year ago, but the plumbing isn't connected yet.  Also, there is a nasty fluorescent tube light fixture in the laundry room that is going to have to go.  It casts a horrible sickly light and makes my colors look gross.

Hood Classic Globe from Rejuvenation Hardware

I really like the new Hood pendant with caged glass from Rejuvenation Hardware, so I think I might get that one for the laundry room.  It's based on industrial styles that were common from 1910-1920, and the wire cage served the useful purpose of containing broken glass if the globe should shatter.  It comes in 12", 14", or 18" diameter and uses a single 300 watt bulb.  I just think it would add a nice splash of personality and character, complement the dark bronze and opal glass fixtures in the kitchen beyond, yet it's a simpler, more functional style that's better suited to a workspace like a laundry room. 

-- Ooh, wouldn't it be fun to rip out the perfectly serviceable tile floor in the laundry room, and replace it with vintage-style 2" hexagonal mosaic tile like this?



Merola Tile Old World Hex with Dot from Home Depot



I'm not even going to suggest that to Bernie; I can't risk a mutiny.  Still, IF I was going to do it...  I like the way this particular background tile ties into my granite, but not so much the black dots.  The dots would need to be a more subtle contrast for me, maybe more of a golden/rust/brownish color on the same spectrum as the golds in the drapery fabric and the tones of the cabinetry.  So it would probably have to be custom-ordered instead of conveniently purchased from the local Home Depot. 

At some point, you just have to say that enough is enough and call it "done."  For now...  ;-)

Completed Backsplash Tile, Utility Sink Relocation, & Kids' Bath Accessories

The backsplash tile was grouted and completed this week.  Because of the beveled edges on our field tile, the installer had to go back and wipe out the excess grout between each tile.

...and this is what the finished backsplash looks like.  Bernie installed the Brizo pot filler that coordinates with the Treso kitchen faucet.  The new range hood delivery was delayed by winter storms, so that won't be here until next week.  However, the under cabinet lights showed up on my doorstep today, so Bernie will be installing those over the weekend.

However, I have to say, THIS is one of my favorite parts of this whole project.  The ugly plastic utility sink with cheapo faucet and a heavy "patina" of staining and splattering with paint, stain, spackle, etc., has now been reinstalled in the garage, where it should have been in the first place!  No longer does this sink besmirch my laundry room! 

I've been waiting to show you the final touches on the boys' bathrooms until after their rooms were picked up:

This is the view from Lars's bedroom through his vanity area into the shared bath.  I found those adorable Alex Moody Monster Feet bath mats from Target, of all places, as well as the poison dart frog shower curtain and the orange striped bath mat in the shared bath.  I ordered each boy a few sets of monogrammed towels from Company Kids, dark blue with orange lettering for Lars, and bright green with navy blue lettering for Anders.  (No, I didn't monogram them myself -- I just don't have time right now to monogram 8 sets of towels!)  Now the inner bath transitions nicely into both open vanities and bedrooms, and it really feels "shared" since the walls are Lars's favorite color, Hyper Bright Home Depot Orange (?!), and the shower curtain is decorated with Anders' kindred animal spirit, the frog.

Here you can see how the Monster Feet rugs bring some of the colors of Anders' vanity wallpaper through into Lars's room, and how the blue in Anders' wallpaper ties in with Lars's wall color.

...And here's the view from Anders' bedroom into his vanity area.  He has the same Monster Feet bath rugs as Lars.  Aren't they adorable?  I don't shop at Target often, but I was searching online for frog shower curtains and I just stumbled onto these things that suited my needs perfectly.

In the immortal words of Porky Pig, "Badeep-badeep-buh-That's All, Folks!"

Kitchen Tilework Commences, and Bernie Gives the Kitchen a Test Drive

Okay, so in this picture of the molding tile, you can see how nicely the polished marble backsplash tile complements the lighter areas of the CD Volcano granite countertop in the background.  All of the marble backsplash tile is this creamy off-white color.  The field tile is just a polished marble brick with slightly beveled edges, to be laid in a brick pattern except for the focal rectangle over the stove, where it will be a herringbone pattern framed by this crown molding type tile.  The herringbone pattern, as well as the beveled edges on the field tile that are apparently not fun to grout, are the reasons why the tile guy from Tile Collection is installing this backsplash tile instead of Bernie.  Also, I want this backsplash installation to be absolutely flawless or it will drive me crazy as long as we live in this house, and I also enjoy being happily married to a man who is still speaking to me.  So, Tile Collection installs the tile this time. 

The beveled bricks are cut to fit and laid out flat on the countertop in the herringbone pattern ahead of installation.  Our tile guy cuts each tile individually to size.

...and now the tile goes up on the wall.  For those of you who are unfamiliar with tile installation, those little plastic tab things are temporary spacers to maintain 1/8" distance between tiles while the thinset (goopy glue stuff) dries.  Without the spacers, the weight of the tiles would cause them to slide down the wall. 

Ta-da!  Done for today.  The thinset adhering the tiles to the wall will dry overnight, and the tile guy will come back tomorrow morning to fill those 1/8" gaps with grout.  My grout color is nearly identical to the marble tile, which will minimize the business of the backsplash tile so that it will no longer "fight" the pattern of the granite the way it does right now.  Also, something weird with my camera and the flash are making the countertop look yellowish and the backsplash light look white.  In real life, the marble echoes the creamy ivory color found throughout all of the granite slabs.

Here is my cutie, test-driving the "new" kitchen.  Bernie made cioppino for dinner and spread out across the entire island countertop.  He is really enjoying having a kitchen again instead of feeling like he's trying to cook dinner behind the counter at a Starbucks.

I'll post more pictures tomorrow after the tile has been grouted.  Hopefully I'll figure out how to adjust the settings on my camera to fix the color distortion so you can see what everything really looks like, but don't hold your breath -- I have a lot of work piled up on my desk and the last thing I need to be doing is reading the instruction manual for my camera.  Or, um, blogging about my tile...