Stonefields Block 19 "The Oscillator," First of Two

Good Morning and Happy Friday, my lovelies!  It's been a busy week, but I managed to finish another appliqué block for my Stonefields quilt (pattern by Susan Smith).  Behold Block #19, "The Oscillator."

Stonefields Block 19 "The Oscillator"

I deliberately did not crop that photo because I wanted to show the difference between my hand stitched appliqué (the green and blue shapes at the bottom of the photo) and my machine stitched appliqué using the stitch I created with the Stitch Designer feature in my Bernina B990 sewing machine.  The size and spacing of the stitches is nearly identical and with Aurifil 100 wt monofilament thread in my needle and Microquilter 100 wt polyester thread in my bobbin, the machine stitches really do look just like my hand stitches in YLI 100 wt silk thread, even under inspection with bright lights and reading glasses.  I'm glad I took the time to customize that stitch on my machine so that I can switch between hand and machine stitching on the same project without any visible difference from one block to the next.

By the way, even using the sewing machine, this is "slow stitching" for sure.  It's like "hand stitching with a machine needle," as Harriet Hargrave said in a workshop I took with her years ago.  Very slow and deliberate stitching under bright lighting, one stitch at a time, constantly pivoting to keep those swing "bite" stitches perpendicular to the edge of the appliqué shape just as if I was hand stitching.  

Size 60 Microtex Needles Leave Visible Holes on Liberty Lawn, But They Will Close Up

The one thing that distracts me on this new block is that the needle holes are more visible on the machine stitched block than on my hand stitched blocks.  I use the smallest size 60 Microtex machine needle for this method, but my size 12 Bohin hand applique needle is skinnier than any needle that could go in a sewing machine.  The other difference is that the hand stitched block below used Tilda quilting cotton fabrics, and I used Liberty of London Tana Lawn prints for my Oscillator block.  The Liberty Lawn is a much lighter weight fabric with a finer, tighter weave and I think the different fabric characteristics are why the needle holes are so apparent right now.  I would expect my machine needle holes to be more pronounced with a batik fabric for the same reasons.  The good news is that needle holes close up when you wet the fabric yarns around them, so I'm not worried about it (I promise!).  It's just an observation.  Every time I step into my studio, my Gemini brain splits into two personalities, The Artist and The Scientist, both asking "What would happen if I tried it THIS way?"

EQ8 + AccuQuilt GO! BOB 2025 Collection: New York Beauty + DWR

Good Morning, my lovelies!  We're switching gears completely today, from the low-tech, needle turn, hand stitched appliqué I shared last time to today's focus: the exciting creative possibilities of computer software and modern die cutting methods to make challenging quilt patterns more accessible and more enjoyable for more quilters than ever before.  😊. Today's blog post includes affiliate links to products I use and adore.

Those of you who've been with me for a while know that Electric Quilt software (the current version is EQ8) is one of my favorite quilting tools.  Before I started using EQ software, I had a couple of really disappointing quilts where I realized only after spending months cutting and sewing blocks that I did not have the right value contrasts to get the effect I envisioned in the finished quilt and too many prints were fighting for dominance, etc.  It is an amazing thing to be able to "try out" limitless combinations not just of colors, but of actual fabric prints in quilt shops today, and know for sure how they will look in your quilt BEFORE you buy them.  

EQ8 software has advanced capabilities that are great for professional quilt pattern designers, but most quilters will get their money's worth out of the program just from using the most basic features.  You don't normally need to draft your own block in the software because there is a library included in the software with hundreds of traditional quilt blocks and then there are inexpensive add-ons that you can purchase to add even more quilt blocks to your library, like the one I'm going to share with you today -- a collaboration between The Electric Quilt Company and AccuQuilt, the makers of the AccuQuilt GO! die cutting system.  This is something I swear I wished into being!  If you already own EQ software and you have also purchased any of AccuQuilt's BOB "Block On Board" dies, you need to pop over to EQ right now and check out the software add-ons that will enable you to design quilts using those dies.  Here's my full disclosure: I paid full price for my EQ software years ago and it has been worth every penny for the money it has saved me in wasting good fabric on lousy ideas.  I have also spent my own money on lots and lots of AccuQuilt dies, some of which I love and use regularly, others not so much.  When EQ first released their AccuQuilt BOB Collections 1 & 2, I bought them immediately because I already owned several of the BOB dies included in those collections.  EQ just recently released a smaller add-on containing all of the BOB dies that were introduced in 2025, the AccuQuilt GO! BOB 2025 Collection, for just $15.95, and I was given this last digital add-on in exchange for sharing my honest review.  I downloaded the 2025 BOB Collection blocks into my EQ software and started playing with them right before I left for QuiltCon...  and that's why I snapped up the AccuQuilt #55392 New York Beauty 9" Finished BOB die with a show discount and lugged it around the show while I looked at all the pretty quilts!

New York Beauty: EQ8, AccuQuilt GO! BOB, + Art Gallery Fabrics

In my opinion, the most useful and life-altering (for quilters!) AccuQuilt dies are the ones for quilt blocks with curved pieces that are tedious to cut by hand, difficult to cut accurately, and challenging to sew together.  New York Beauty is one of those designs, but the AccuQuilt die cut fabric patches can be cut swiftly, accurately, and with automatic notches added to every patch for matching up opposing curves once you sit down to sew.  In the screen shot above, I've designed a 39" x 39" baby quilt, the perfect size for a play mat or stroller quilt, that is completely to scale using mostly Art Gallery fabrics plus a Kaffe Fasset stripe print.  I love it so much!  

Conquering Stonefields Block 18, "Star in a Star"

Happy Sunday, everyone!  I have another finished block for my Stonefields sampler quilt (pattern by Susan Smith) to share with you, Block 18 "Star in a Star."  It was a fiddly little bugger for sure, but I'm delighted with how it turned out.  These blocks will finish at 6" after being trimmed down and sewn into the quilt.

Stonefields Block 18, "Star in a Star"

I have heard from a few other quilters who are working on Stonefields or other Susan Smith patterns who are struggling with the lack of instructions, so I'm going to try to share a bit more about how I'm puzzling out the more challenging blocks.  This is not "the right way," "the only way," or even necessarily "the best way" -- only the way that worked for me.

Stonefields Block 17 Remake + Mistake Discovered in Block 16

 You guys, I was so proud of myself when I switched off my sewing machine last night, put my new Stonefields Block 17 "Square Peg in a Round Hole" on my design wall, and went to bed thinking all mistakes had been corrected.  (If you're wondering what was wrong with the first one I made, read this blog post from a few days ago).  I strongly prefer the on-point orientation of that square with the circle cutout now that I've fixed it in my purple block.  The square on point element is repeated in many of the blocks in this quilt, and repeated design elements are one of the things that gives cohesion to a sampler quilt like this one.  

Stonefields Block 17, Just as Susan Smith and Rebecca Grace Intended

Before remaking the block, I took the time to trace over the ridiculously faint lines of the block pattern with an extra fine point Sharpie pen to make sure I could clearly see it through my fabric, because even with an LED light box you can't see these patterns well enough through most fabrics.  If I'd done that tracing and darkening of the pattern right off the bat, these mistakes would not have happened in the first place.  And I am hugely annoyed with pattern designer Susan Smith that I have to take all that extra time to trace over every stinking block pattern with Sharpie before I can use it, because the pattern cost $200(!!!) and there are hardly any instructions whatsoever, just vague hints and clues and anecdotes about the blocks, and how difficult would it have been to have these patterns printed with thicker, darker lines like every other quilt pattern author uses in their patterns?  GRRR...

So this morning I walked into the studio, admired all my pretty blocks on the wall (I finished a couple more EPP hexagon rosettes for the border yesterday as well:

Slow But Steady Stonefields Progress: My Design Wall Today at 8:19 AM

I am so glad I remade that purple block!  It only took me an hour or two and whereas the old block made me feel disappointed and annoyed with myself, the new block makes me feel DELIGHTED and pleased with myself for identifying what went wrong, adjusting my process to make errors less likely, and successfully creating the block exactly the way that I wanted it to look instead of settling for less.  

Stonefields Blocks 16 + 17 "Square Peg In a Round Hole," With an Oopsie!

There are two new Stonefields blocks on my design wall, and one of them even looks like it's supposed to!  Behold, Blocks 16 & 17, "Square Peg In a Round Hole," one of which has the square peg on point the way it belongs, and the other of which does not:

17 Stonefields Blocks + 21 Hexie Rosettes for Border

Aaaargh!!!  I only accept partial responsibility for this error.  The appliqué patterns for the Stonefields quilt are printed RIDICULOUSLY faintly, nearly impossible to see through the background fabric with even the brightest LED light box.  I did not realize that my background fabric was oriented incorrectly until after I'd glue basted the delicate purple square with the circle cutout onto my block, and I used a bit more glue than normal because of how skinny those bits are on the side.  I wanted to secure that shape to my background fabric while it was flat on my work surface to preclude any stretching or distortion that might occur.  In hindsight, I would have been better off skipping the darned light box altogether and just positioning the shapes on this blocks using the horizontal, vertical and diagonal fold lines.  Shoulda, woulda, coulda.  I noticed the mistake as soon as I finished glue basting the purple block and heat setting the glue with the iron.

Edges Turned Smoothly, Glue Basted to the Background, Not Yet Stitched

I considered peeling the shapes off to reposition them correctly before stitching, but when I tried to lift one purple corner I realized how securely it was glued down and didn't want to risk damaging the applique.  The prep work on these blocks took a LONG time and I didn't want to have any unnecessary do-overs!

Deco Bed Quilt Going Back in Time Out Following Hand Quilting Experiments

Alright, I think I'm done with the hand quilting experiments on my Deco Bed Quilt and it's time for this project to get shoved back into a closet again -- after a quick recap for the benefit of Future Rebecca.

Hand Quilting in my Grace Square Lap Hoop

After trying both ways, hand quilting with and without a hoop, I definitely prefer the hoop.  It makes it so much easier to maintain consistent tension when you pull the thread through the fabric and it definitely makes it easier to mark quilting lines, if you feel like marking them.  I have had this Grace Square Lap Hoop for over twenty years, since I used it to hand quilt a much smaller throw size quilt for my husband.  My hoop is similar to this current Grace Hoop 2 from the Grace company, except that mine doesn't have that opening in the bottom that would let you attach it to a stand.  Here's the problem: my Deco quilt is a whopping 102" x 102", the quilt top fabrics are all those beefy Kona Solid fabrics, and I used a midweight Hobbs 80/20 black batting rather than one of the lower loft battings that are tailored for hand quilters.  These factors combined to create a tremendous weight and drag that felt cumbersome to me as I was conducting my hand quilting experiments on the sofa, and I was not keen on committing to spending a hundred or more hours wrestling with this giant quilt in my lap when I could be hand stitching appliqué or English paper piecing instead.  Enormous quilts like this one are why hand quilting FRAMES are a thing!  Now, I can see how the newer version of my hoop along with the optional stand would help manage the weight of a big quilt for hand quilting, but I'm not about to invest in a whole new hoop and stand setup for hand quilting at this time.  I would not be able to recline if my hoop was attached to a floor stand, the stand would be one more thing to store or to trip over next to the sofa, and I definitely wouldn't be lugging it around as a portable project.

Here's what the hand quilting was looking like so far:

Hand Quilting in Wonderfil 12 wt Fruitti Variegated Green Thread

I'm not giving up on the idea of ever hand quilting again, just not going to slog through trying to do it on such a big quilt.  So what you see pictured above in the green areas is 12 weight, 3-ply Wonderfil variegated cotton Fruitti in a variegated green color (this post contains affiliate links).  After trying different types and sizes of hand needles, I settled on a Bohin Size 7 Embroidery needle and I used the "stab stitching" method of using my non-dominant left hand on top of the quilt to push the needle down through the quilt, then my dominant right hand beneath the quilt grabbed the needle, turned it around and guided it (blind) back up through the quilt for my left hand to grab the needle.  This was initially awkward and clumsy, but it's amazing how quickly your fingers can learn what you want them to do with repetition.  After 30 minutes or so, the motions were becoming more automatic and I was getting a lot better at poking the needle up in the right spot on the first try.